Notes:

1. Attach The water supply lines before you attach the faucet to the sink.

3. Please use wrench to tight the water pipes into the faucet to avoid damage.

4. Make sure don't turn the angle valve all the way up. It was give too much pressure to the faucet and cause leaking. 

5. Don't overtighten the connections or you will bend and ruin the pipes on the faucet.

Installation instructions:

1. Unscrew the nuts, pads, and clevis out.

2. Place the UP PAD over the counter faucet mounting hole.

3. Drop the faucet into place, allowing the supply lines to fall through the appropriate holes in the sink.

4. Secure the faucet mounting nuts to the underside of the countertop.

5. Fix nut tightly with a wrench.

6. Turn on main water supply and check for leaks, repair as required.